PROFESSIONAL DEHUMIDIFIERS

PROFESSIONAL DEHUMIDIFIER
YARD Series professional dehumidifiers are refrigerating circuit appliances that introduced into the environment to be dehumidified, will recirculate the air gradually lowering the humidity level to the desired value. Decreasing the air humidity value even gradually withdraws it from the walls and all the materials in the room. All models work with ecological refrigerant gases (R134a or R407c).

CONSTRUCTION
The body is entirely made with painted zinc plated steel: the strength of the metal, the solid coating or powder coating at high temperatures make these machines suitable for the heaviest use. The frame, also made of galvanized steel, gives to the machines quality and durability over time. The unique design has been designed to maximize mobility: The large diameter wheels allow for easy transportation even on rough terrain construction sites, the unique retractable handle can be easily folded while significantly reducing the footprint of the machine is essential for those who must continually move the dehumidifier by car or van from one place to another. All models are stackable for an easy storaging.

COMPONENTS
All machines are designed and thoroughly tested, the individual components that constitute the engine of the dehumidifier itself, have been selected to work in an efficient and durable way. The use of rotary compressor has helped to reduce power consumption and maximize performance, the hot gas defrosting device allows the dehumidifier to operate down to +2 °C.

ELECTRONIC CONTROL
The new and modern control, with the electronic humidistat, standard on all models, optimizes the use of the dehumidifier by running it only when needed. The control pane has been placed so that it's easily accessibile by the user, who will be able to set the machine through "soft touch" buttons. For maximum safeness, all controls are in low voltage. The dynamic defrosting function also minimizes the time required to remove any ice from the heat exchanger, function necessary to maintain a high level of machine efficiency at lower temperatures. Standard electronic control operates two hour meter, one resettable, and a cumulative one: essential and practical for hire.

TANK
The water removed from the ambient air is collected in the tank (where fitted) that contains a floating device that stops the dehumidifier when full. In addition the machines are designed for simple, and fast installation of the continuous discharge: the convenience of not having to empty manually the water tank alongside the security of the floating device that, in case of malfunction of the discharge will stop the dehumidifier with the reservoir full. Once installed it will no longer need to manually empty the tank and the dehumidifier will work fully automatic. The Yard Pro, due to its large-capacity, does not have a tank but a practical system of connection for the continuous water drainage, located at 35cm from the ground, to facilitate the use of an external water tank.

AIR FILTER
This component is available as standard on all models. The air filter prevents dirt from reaching the heat exchangers and thus takes the high efficiency of the machine over time. The filter is easily removable for cleaning operation: it can be cleaned with a vacuum, compressed air or, at worst, well washed in water.

CUSTOMIZATION
The machines can be customized on request. For example in addition to the continuous drainage, it's available the water pump that allows to evacuate the condensed water lifting it even of a few meters. This will allow you to automatically flow the condensed water in places that are higher than where the dehumidifier was located.