SWIMMING POOL DEHUMIDIFIERS

INTRODUCTION
SP Series dehumidifiers are refrigerating circuit appliances that recirculate the air gradually lowering the humidity level to the desired value. These devices are designed in particular for use in environments with a pool, but are widely used in large environments such as warehouses, museums and wineries. Every model can be supplied in two configurations, one to be installed directly into the room to be dehumidified, and one "through the wall" to be installed  in an adjacent plant room. All models work with ecological refrigerant gases (R407c or R410a).

CONSTRUCTION
The body and the frame are entirely made with galvanized sheet metal: the strength of the metal and the subsequent high-temperature powder coating makes these devices suitable for use as heavy machine and gives the quality and durability over time. Even exchangers are protected by painting: this treatment stems from the need to protect them in rooms with swimming pool where the chlorine in the air is very aggressive towards metals such as copper, aluminium and iron. The machines should be installed on the wall and are supplied with all necessary mounting brackets. The unique and elegant design will enrich the environments in which the dehumidifier will be installed, such as swimming pools, making them even more comfortable and pleasing.

COMPONENTS
All machines are designed and thoroughly tested, the individual components that constitute the engine of the dryer itself, have been selected to work in an efficient and durable way. The use of rotary compressor has helped to reduce power consumption and maximize performance, heat exchangers have been painted to be protected from chlorine.

ELECTRONIC CONTROL
The new electronic control optimizes the operation of the dehumidifier while the built-in humidistat, that comes as standard on all models, will run the unit only when needed to optimize consumption. The control panel and the probes are both remotable during installation by the user. The dynamic defrosting device function also minimizes the time required to remove any ice from the heat exchanger, function necessary to maintain a high level of machine efficiency at lower temperatures. The dehumidifier is designed to fit the optional accessories when installed as standard.

AIR FILTER
This component is available as standard on all SP models. The air filter prevents dirt from reaching the heat exchangers and thus takes the high efficiency of the machine over time. For cleaning operations the filter can be easily removed: it can be cleaned with a vacuum, compressed air or washed into the water. For SPW Series output and intake grilles are available as accessories, the latter with the air filter included.

ACCESSORIES
The range is completed with a series of accessories that allow you to optimize the installation and complete the operation, making the dehumidifier suitable for a wide range of applications.